2,85mm CorkFill

38.94€ * 39.95€ * (2.53% Saved)
Content: 0.65 Kilogramm (59.91€ * / 1 Kilogramm)

Prices incl. VAT plus shipping costs

Bitte wähle zuerst eine Variante


  • 3D7219
  • 8719033555327
  • colorFabb
  • 0,65 kg
Unsere Zahlungsarten:
GiropayCredit cardDirect debitMasterCardPayPalRatenzahlung Powered by PayPalInvoiceSofort.VISAPrepayment


  • Kostenlose Beratung
  • Schneller Versand
  • Viele Artikel auf Lager
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our... more
Product information "2,85mm CorkFill"

Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.




colorFabb corkFill - PLA/PHA + fine cork fibres

Diameter Tolerance:

± 0.05 mm


Glass Transition Temperature


Tips & Tricks:


Adviced 3d printing temperature:

Adviced 3d print speed:
40 - 60 mm/s

Advised Heated bed (if you have one, not strictly necessary)
TIP! For stronger prints and better reliability increase flow rate with about 4 -10%.


General Tips

Build platform

Our PLA/PHA compound performs well on both heated and non-heated build platforms. For those users printing on a cold build platform we advise applying masking tape to the build area. The rough surface of the tape will provide enough adhesion for the first layer to stick and print almost without any warping.


Users using heated build platforms have quite a few options these days. The usual suspects are glass and aluminum build plates. For directly printing on glass or aluminum we advice user to apply glue-stick. A very thin layer will be sufficient to keep your print nicely in place. Another method is dissolving wood glue in water, you the consistency of the substance can be quite thin, a bit like milk. By applying just a few drops and smearing this out before you start heating the built plate will create a very thing layer which holds the woodFill down very well. If applying this method, be careful that you don’t get your electronics wet.

Another method that works well with colorFabb woodFill is polyimide tape, or Kapton tape. This tape is available as a very narrow strip or very wide strips which allow you to cover the build plate in one go. When the tape is applied correctly it can last for months.

TIP! Take your time leveling the bed and adjusting the the gap between 3d printer nozzle and build plate. A perfect first layer will is very important, especially for 3d prints with a large bottom layer. Having the nozzle set to close to the build plate will cause a pressure build up and as a result back flow in most hot ends. 


TIP! PLA/PHA has very minimal warping tendencies, however if your printing parts which take up the maximum of you buildspace you might see some warping. If it’s very important that your part is perfectly flat than we suggest to turn down the fan that is cooling your part. This allows the material to slowly get rid of heat without warping. After a few centimeters you can turn on the cooling if the part needs it.


Related links to "2,85mm CorkFill"
Eigenschaften "2,85mm CorkFill"
material: Special filaments
Manufacturer: colorFabb
Filament thickness / diameter: 2,85 mm
color changing: No
colour: brown
Read, write and discuss reviews... more
Customer evaluation for "2,85mm CorkFill"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

2.52% gespart
2,85mm Steelfill colorFabb 2,85mm Steelfill
Content 0.75 Kilogramm (64.92€ * / 1 Kilogramm)
From 48.69€ * 49.95€ *
Order number: 3D7223
2.52% gespart
1,75mm Steelfill colorFabb 1,75mm Steelfill
Content 0.75 Kilogramm (64.92€ * / 1 Kilogramm)
From 48.69€ * 49.95€ *
Order number: 3D7226
2.52% gespart
XT-CF20 2,85mm colorFabb XT-CF20 2,85mm
Content 0.75 Kilogramm (64.92€ * / 1 Kilogramm)
From 48.69€ * 49.95€ *
Order number: 3D7236
XT-CF20 1,75mm colorFabb XT-CF20 1,75mm
Content 2.2 Kilogramm (53.15€ * / 1 Kilogramm)
116.93€ *
Order number: 3D7243
Creality Ender-5-Plus Creality3D Creality Ender-5-Plus
531.99€ * 629.00€ *
Order number: CR-E5PLU
BCN3D Sigmax R19 BCN3D BCN3D Sigmax R19
3,600.00€ * 4,397.00€ *
Order number: BCN-SX19
Wir pflanzen ...